![]() ![]() ![]() KT’s Range of Micro Blade Fuses KT Micro Blade Fuses are available in packs of 5 (blister) and packs of 100 (bulk) KT Blade Fuses are available in Micro, Mini, Standard and Maxi Sizes. Blade Fuses can be mounted in fuse blocks, in-line fuse holders, or fuse clips. The Mini Blade Fuses were developed in the 1990’s. Standard Fuses were developed in 1976 for low-voltages use in motor vehicles. Each fuse is printed with the Rated Current in Amperages on the top. This is usually the case in a ceramic fuse.īlade fuses (also called spade or plug-in fuses), with a plastic body and two prongs that fit into sockets, are mostly used in the Automotive Industry. Sometimes, sand or quartz powder is filled in the body to alter the behavior of the fuse. The multiple wires could be arranged in different ways to make the fuse behave differently. The element could either be a single wire, or consist of more than one wire. These terminals are connected by the fuse element, which is made of copper, aluminium, zinc, or silver. The body of a Glass Fuse is called the barrel and it has a terminal made of plated copper or brass at each end. KT Fuses are made from Glass, Ceramic, or Plastic. KT Ranges a large variety of Fuses including:Ĭlick Here to View KT’s Fuse & Fuse Holders Catalogue Section An incorrect fuse could either mean no protection because it has not melted in time, or over sensitivity when it blows repeatedly for no real reason. This prevents the appliance from damage due to excess current.Įach fuse responds differently to current flow and surges, and takes a different amount of time to react it is therefore important to choose the correct fuse for the circuit it is to be introduced in. There are a number of different types of fuses available, and these differ in size, shape and material. When a fault occurs, such as an overload or short circuit, the high current that is flowing through the fuse melts the fuse element, thus interrupting the flow of current and breaking the circuit. A fuse protects electrical appliances and equipment by breaking the electrical circuit in the event of an overload of current or a short circuit. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |